|
With few exceptions, any of our lighting
fixtures can be fitted with any of the listed mounting brackets at no
additional cost. We also have brackets (not shown) for most
popular pop-up and panel display brands.
|
 B2025
This is our most-requested mounting bracket. It
will clamp panels up to 2 1/4", and has an arm
that will slide inside the block for length adjustment.
Finish: Black, White or Silver.
 B2031
Clamps to panels up to 1 1/2".
Its angle bracket
will hold panels up to 15 degrees above horizontal.
Finish: Black, White or Silver.
 B2085
Clamps to panels up to 2 1/4". Adjustable bracket
will provide up to 180 degrees vertical adjustment.
Finish: Black, White or Silver.
 B2036
Heavy-duty dual clamp will clamp up to 1 1/2" pipe
and up to 1 1/34" flat panels. The bracket will hold
the arm in a fixed horizontal position.
Finish: Black, White or Silver.
For same bracket with adjustable arm length, specify B2036-1.
 B2035
Pipe clamp will clamp pipe from 1
3/4" up to 2 1/2" in
diameter, and will clamp to a flat panel from 1 5/8" to 4" thick.
Also available with a slide block for adjustable arm
lengths.
Finish: Black, White or Silver.
For same bracket with adjustable arm length, specify B2035-1.
 B2005
Bolt-down base is 3" wide with 3/16" diameter holes
for attaching to the top of the display. It is equipped
with a slide-block for arm-length adjustment. The arm
angles up to 15 degrees above horizontal.
Finish: Black, White or Silver.
For same bracket with adjustable arm length, specify B2005-1.
 B2000
This slip-over bracket is adjustable from 5/8" to 2 1/4"
thick. The arm angles up at 15 degrees.
Finish: Black, White or Silver.
 B2006
This slip-over bracket will be made to clamp any
panel thickness you specify. It is designed to be
used with a bent arm, as shown.
Finish: Black, White or Silver.
 B2009
The pin base slides into a .375 diameter hole for
mounting. It is most commonly used with bent arms,
as shown.
Finish: None
 B2014
The pin base slides into a .25" diameter hole for
mounting. It is most commonly used with bent arms,
as shown.
Finish: None
 B2022
This spring clamp will clamp panels up to 2 1/4" thick.
Finish: Black or White
 B2023
This quick-connect bracket is designed to mount the
bottom bracket to your display permanently, and the
top bracket can then slide in or out for quick assembly
and disassembly. The arm angles up at 15 degrees.
Finish: Black, White or Silver.
 B2026
This bracket is designed to slip over any panel thickness
you specify. It is designed for a straight arm that angles
90" from the wall.
Finish: Black, White or Silver.
 B2027
This bracket is designed specifically for attaching to
3" wire Gridwall. Angle of arm can be changed upon request.
Finish: Black, White or Silver
B2031
This bracket is designed to clamp panels up to
2 1/4" thick. The arm angles up at 15 degrees.
Finish: Black, White or Silver.
 B2028
Designed specifically for Slatwall panels.
Angle of arm can be changed upon request.
Finish: Black, White or Silver.
 B2034
This bracket angles up at 15 degrees and is designed
to slip over whatever panel thickness you specify.
Finish: Black, White or Silver.
 B2067
This mini C clamp is designed to clamp pipes up to
5/8" thick.
Finish: Black, White or Silver.
|
|
|
|
|
 STANDARD
INCANDESCENT REFLECTOR LAMPS
A
A19 Medium Base 100W, 120V $1.80 each
B
R40 Medium Base 150 W. 120V FLOOD $9.00 each
C R14 Intermediate Base 25 W. or 40W. 120V. FLOOD $6.00 each
D
R30 Medium Base 100 W. 120 V. FLOOD $7.00 each
E
R20 Medium Base 75 W. 120 V. FLOOD $6.00 each
 QUARTZ HALOGEN
REFLECTOR LAMPS
A
PAR 20 Medium Base 50 W. 120 V. FL or NSP $18.00 each
B PAR16 Medium Base 60 W. OR 75 W 120 V. FL or NSP $24.00 each
C
PAR30 Medium Base 50 W. OR 75 W 120 V. FL or NSP $18.00 each
D PAR14 Medium Base 35 W. 120 V. FL $18.00 each
E
PAR 38 Medium Base 90W or 120W 12V FL or SP $18.00
F
PAR30LN Medium Base 50W or 75W 120V FL or SP $18.00
 LOW VOLTAGE
(12V) QUARTZ
HALOGEN LAMPS
A MR8 20 W or
35 W
B MR16/CG 20W, 35W or 75W, NFL or NSP, Bi-Pin Base $14.00 each
C
MR-11/CG 35 W. OR 20 W 12V NFL or NSP...Bi-Pin Base $15.00 each
D Q20G4 20 W. Miniature Tube...Bi-Pin Base 12V $5.00
 QUARTZ
HALOGEN LAMPS
A Q100W. T/3S CL 120 V. J. Type Double Ended 3-1/8 RSC Base $11.00
each
Q200W. T/3S CL120 V.J. Type Double Ended 3-1/8 RSC Base $11.00 each
B Q50CI/DC 120 V. Double Contact Bayonet Base... single ended
$20.00 each
Q100Cl/DC 120 V. Double Contact Bayonet Base ... single
ended $20.00
C Q150W. T/3 CL 120 V. J. Type Double Ended 4-11/16 RSC Base $11.00
each
Q200W. T/3 CL 120 V. J. Type Double Ended 4-11/16 RSC
Base $11.00 each
Q300W. T/3 CL 120 V.J. Type Double Ended 4-11/16 RSC Base $11.00 each
D Q35GY6.3 35 W. V. Miniature Tube Single Ended... Bi-Pin Base
$12.00 each
E MR16 120V, 50W, Flood $17.00 each
SINGLE TUBE FLUORESCENT LAMPS
32 W. T/8 Tube 48” Long, Cool White...Bi-Pin Base $10.00 each
25 W. T/8 Tube 36” Long, Cool White... Bi-Pin Base $10.00
17 W. T/8 Tube 24” Long, Cool White...Bi-Pin Base $10.00
15 W. T/8 Tube 18” Long, Cool White... Bi-Pin Base $5.00
 2D
& TWIN TUBE FLUORESCENT LAMPS
A
40W. Twin Tube/41K (Biax), RS, 120V, 4-Pin Base, 22 1/2" long $24.00
B 36/39 W. Biax Lamp 120 V. 4 Pin Base 16-1/2” long $24.00 each
C 18 W. Biax Lamp 120 V. 4 Pin Base 10-1/2” long
$22.00 each
D
13 W. Biax Lamp 120 V. 4 Pin Base 7-1/2” long $7.50
E 38W 2D Biax Lamp 120 V. 4Pin Base 8' square $26.00
 T4
MINI TUBE FLUORESCENT LAMPS
8 W T4, 1/2" x 13 1/2" Long, Mini Bi-Pin Base $10.00
12W T4, 1/2" x 17 1/2" Long, Mini Bi-Pin Base $11.00
20W T4, 1/2" X 21" Long, Mini Bi-Pin Base $14.00
22W T4, 1/2" x 29" Long, Mini Bi-Pin Base $20.00
26W T4, 1/2" x 40 1/4" Long, Mini Bi-Pin Base $25.50
28W T4, 1/2" x 46 1/4" Long, Mini Bi-Pin Base $30.00
|
|
|
|
|
Lighting
Accessories |
|
 iColorMR
Digital Color-Changing Lamp
MR16 style lamp has a range of 16.7 million colors.
Programming with dip switches on the lamp
produces different combinations of colors LEDs.
It can also be programmed to six different lighting
styles:
Fixed Color: One single color
Color Wash: Cycles throughout the entire color wheel
Cross Fade: Cycles back and forth between two different
colors
Random Color: Jumps from one color to another at random
Fixed Color Strobe: One-color strobe
Variable Color Strobe: Strobe of random colors
Features: Runs off any 12V power source. 2" diameter.
22º beam spread
$258.00
 F6060
MR16 Filter
Clip
Clips on the face of any standard
M16 lamp.
Holds F6061 and TX18 filters.
Finish: Black
$8.00
$8.00
 F6061
MR16 Honeycomb Filter
Helps eliminate glare. Requires
F6060 Filter Clip.
Finish: Black
$8.00
 F6062
Mini MR16 Barndoor
It clips to the face of any MR16 lamp,
and helps deflect the beam spread.
Finish: Black
$17.00
 F6063
Mesh MR16 Bulb Cover
Wire mesh helps reduce glare
from the back of the lamp.
Finish: Black
$6.50
 F6064
Decorative Colored Glass Cones
Colors: Red, White, Blue
$10.50 ea
 TX18
Colored Glass Lenses
(Requires F6060 Filter Clip)
Colors: Red, Blue, Amber, Green, Yellow, Clear
$16.00 ea.
(Clear price is $5.00)
 Fluorescent Tube Filters
Colored lamp sleeves give ordinary
fluorescent lamps a special glow.
F17 24' long. Clear only. $2.50
F25 36" long. Clear only. $3.50
F32 48" long. Colors: Red,
Blue, Pink, Amber, Green, Clear. $6.
$6.00
ea
 SLX1
Swivel-Action Barn Door
Barn Door accessory for XT501 and XT603.
Dimensions: 1 9/16" D x 3 3/16" H.
Finish: Black
$45.00
|
|
